Back to Top

1
Hi, Guest!

  LOKASI :  Surabaya

  AKTIVITAS :  14/10/2021

BAGIKAN :   

Bagikan :
Kontak Kami  
APAR, FIRE ALARM, HYDRANT, GATE PARKIR OTOMATIS, INVERTER, MOTOR AC, OTOMATION (PLC), ELECTRICAL PANEL

Fire Alarm System Notifier Fire Alarm Control Module FCM-1

Update Terakhir
:
26 / 01 / 2021
Min. Pembelian
:
1 Unit
Harga Mulai
Rp. 1.585.000
Sampai dengan
Rp. 1.585.000
Bagikan
:

Detail Fire Alarm System Notifier Fire Alarm Control Module FCM-1

Specification

  • Built-in type identification automatically identifies these devices to the control panel.
  • Internal circuitry and relay powered directly by two-wire SLC loop. The FCM-1(A) module requires power (for horns, strobes, etc.), or audio (for speakers).
  • Integral LED “blinks” green each time a communication is received from the control panel and turns on in steady red when activated.
  • LED blink may be deselected globally (affects all devices).
  • High noise immunity (EMF/RFI).
  • The FCM-1(A) may be used to switch 24-volt NAC power, audio (up to 70.7 Vrms).
  • Wide viewing angle of LED.
  • SEMS screws with clamping plates for wiring ease.
  • Direct-dial entry of address 01– 159 for FlashScan loops, 01 – 99 for CLIP mode loops.
  • Speaker, and audible/visual applications may be wired for Class B or A (Style Y or Z).
Tampilkan Lebih Banyak
bahtera teknik surabaya
bahtera teknik surabaya

Bahtera Teknik Surabaya

PREMIUM GOLD 5 Tahun
Simolangit 13 No. 83A
Workshop : Ruko Bukit Citra Mas RB-12, Kota Baru Driyorejo, Surabaya
Indonesia 60255
Surabaya
14 / 10 / 2021
Hubungi Kami

Detail Fire Alarm System Notifier Fire Alarm Control Module FCM-1

Specification

  • Built-in type identification automatically identifies these devices to the control panel.
  • Internal circuitry and relay powered directly by two-wire SLC loop. The FCM-1(A) module requires power (for horns, strobes, etc.), or audio (for speakers).
  • Integral LED “blinks” green each time a communication is received from the control panel and turns on in steady red when activated.
  • LED blink may be deselected globally (affects all devices).
  • High noise immunity (EMF/RFI).
  • The FCM-1(A) may be used to switch 24-volt NAC power, audio (up to 70.7 Vrms).
  • Wide viewing angle of LED.
  • SEMS screws with clamping plates for wiring ease.
  • Direct-dial entry of address 01– 159 for FlashScan loops, 01 – 99 for CLIP mode loops.
  • Speaker, and audible/visual applications may be wired for Class B or A (Style Y or Z).
Tampilkan Lebih Banyak